home: News
 
Why should install indoor temperature boiler installation Britain SHIKAR
Time:2013-05-31 Click:
1, the room temperature controller is to control the indoor temperature, wall hanging furnace start, stop control device. Its role is to make the indoor temperature can maintain a certain comfort but also can ensure the energy saving wall hanging furnace. If there is no room temperature controller, users can only through adjusting the hanging furnace panel "heating temperature control" to adjust the hanging furnace outlet temperature and thus indirectly regulate the indoor temperature, by this way the regulation of the indoor temperature is a very difficult thing, room temperature fluctuated, adjusted it is difficult to achieve satisfactory temperature, not only a waste of time and a waste of natural gas. If the use of room temperature controller to adjust the room temperature, it will be very accurate indoor reaches the desired temperature, simple operation and energy saving. Time proved, the installation of wall mounted boiler room thermostat than hanging furnace without thermostat to 20% - 30% energy saving, energy-saving effect is very obvious.

2 , the installation of room temperature controller
(1), according to the user's individual needs, can be installed in the living room or room temperature controller is in the bedroom.
(2), the thermostat should be installed in the indoor air circulation, and the suitable operation of the wall, above the ground 1.5 meters is appropriate.
(3), the thermostat is not installed in the door or window, so as to avoid outdoor cold wind blowing directly to the normal working temperature controller interference wall hanging furnace.
(4), the thermostat is positive and don't have any shelter.
(5), the thermostat not installed in the heat dissipation of the television, radiator, fireplace, do not install in direct sun position.

3, the room temperature controller must be split and wall hanging furnace.
Because the room temperature controller must be installed in the living room or bedroom in order to achieve the purpose of energy saving, and hanging furnace is generally installed in the kitchen, so the room temperature controller must be and wall hanging furnace body.

Room temperature controller Sheng Kai hanging furnace factory original standard can meet the requirements of the regulation of water temperature and can meet the requirements of indoor temperature regulation, convenient operation, obvious energy saving effect.

Sheng Kai moved from a warm start ~ ~